Home > Weed Killers > Quicksilver Herbicide
Quicksilver Herbicide
T&O Herbicide - Handle broadleaf weeds with pure speed.
Your customers demand a fast solution to their broadleaf weed problem. QuickSilver® T&O herbicide helps you give your customers exactly what they demand─ enhanced speed of kill and visible results in just 24 hours.
Add QuickSilver® T&O herbicide to every postemergence herbicide tank mix and watch a broad spectrum of mature, perennial broadleaf weeds disappear in a hurry. QuickSilver is uniquely engineered to be effective in both cool and warm climates. No other herbicide offers you this level of flexibility in application temperatures.
| Active Ingredient | % |
|---|
| Carfentrazone | 21.30 % |
| Other Ingredients | 78.70 % |
Label & SDS
Mode of Action
Cell Membrane Disruptors
Site of Action
(14) PPO Inhibitor
Available on Amazon
Available on Do My Own
Safe On
Click on a grass type below to see safe application rates:
Bahiagrass, Bermudagrass, Buffalograss, Centipedegrass, Seashore Paspalum, St. Augustinegrass, Zoysiagrass, Annual Bluegrass, Bentgrass, Colonial Bentgrass, Fine Fescue, Kentucky Bluegrass, Perennial Ryegrass, Red Fescue, and Tall Fescue
Not Safe On
No not safe on treatments listed. Please, review the label or contact the merchant for more information.
Maximum Yearly Limits
0.40 lb a.i./acre per year.
Time Between Applications
If necessary, applications may be repeated every two weeks at a rate that is no less than 2.0 fluid ounces per acre (0.046 fluid ounces per 1,000 square feet) and no more than 6.7 fluid ounces/acre to control moss that has reestablished, as long as the annual maximum rate of 0.40 lb a.i./acre per year is not exceeded.
Effective Temperature Range
Extremes in environmental conditions e.g. excessively high or low
moisture or temperature may affect the activity of this product.
After Seeding Instructions
QuickSilver T&O Herbicide can be applied to the following species of turfgrass at 7 days or more after emergence for species established by both seeding and sprigging: hybrid bermudagrass, common bermudagrass, St. Augustine, creeping bentgrass, tall fescue, perennial ryegrass and Kentucky bluegrass. Application to zoysiagrass should be delayed until at least 14 days after emergence to avoid extended discoloration. Slight discoloration may be observed immediately after application for hybrid bermudagrass, however, normal turf color returns by 12 days after emergence if no other stresses are present. Areas treated with QuickSilver T&O Herbicide may be seeded or overseeded one day following application.
Surfactant Instructions
Use a non-ionic surfactant in the spray mix at a rate of 0.25% volume/volume. Follow all adjuvant manufacturers use guidelines.
CertainLabel™
Quicksilver Optimized Application Label Rate Calculator
Legend:
Control
Suppression
No Control
Spot Treatment:
per
Blanket Treatment:
per
1
| Grass / Turf Types | Safe |
|---|---|
| Bahiagrass |
|
| Bermudagrass |
|
| Buffalograss |
|
| Centipedegrass |
|
| Seashore Paspalum |
|
| St. Augustinegrass |
|
| Zoysiagrass |
|
1
Jump to
CertainLabel™ Quicksilver Label Rates & Calculator
for
these 7 turf types
Spot Treatment
per
Label Rate:
0.03 fluid ounces per gallon
Cost Effectiveness:
Makes 266.667 gallons
at a cost of
$0.58 per gallon
at a cost of
$0.58 per gallon
Instructions:
For spot treating weeds, other than moss, with hand-held or backpack sprayers mix 0.030 fluid ounces (0.9 milliliters) of this product in one to two gallons of water to treat 1000 square feet.
Blanket Treatment
per
Label Rate:
0.02 - 0.05 fluid ounces per 1,000 sqft
Cost Effectiveness:
Covers 166667 - 347826 square feet
at a cost of
$0.44 - $0.93 per 1,000 sqft
at a cost of
$0.44 - $0.93 per 1,000 sqft
Instructions:
Established warm season grasses listed above are generally tolerant to applications of QuickSilver T&O Herbicide but may be susceptible to transitory yellowing when they are under stress. Stress is typically associated with but not limited to extreme high or low temperatures, Disease infection or insect infestation, extreme high or low moisture conditions, or transition into or out of dormancy.
2
| Grass / Turf Types | Safe |
|---|---|
| Annual Bluegrass |
|
| Bentgrass |
|
| Colonial Bentgrass |
|
| Fine Fescue |
|
| Kentucky Bluegrass |
|
| Perennial Ryegrass |
|
| Red Fescue |
|
2
Jump to
CertainLabel™ Quicksilver Label Rates & Calculator
for
these 7 turf types
Spot Treatment
per
Label Rate:
0.03 fluid ounces per gallon
Cost Effectiveness:
Makes 266.667 gallons
at a cost of
$0.58 per gallon
at a cost of
$0.58 per gallon
Instructions:
For spot treating weeds, other than moss, with hand-held or backpack sprayers mix 0.030 fluid ounces (0.9 milliliters) of this product in one to two gallons of water to treat 1000 square feet.
Blanket Treatment
per
Label Rate:
0.02 - 0.05 fluid ounces per 1,000 sqft
Cost Effectiveness:
Covers 166667 - 347826 square feet
at a cost of
$0.44 - $0.93 per 1,000 sqft
at a cost of
$0.44 - $0.93 per 1,000 sqft
3
| Grass / Turf Types | Safe |
|---|---|
| Tall Fescue |
|
3
Jump to
CertainLabel™ Quicksilver Label Rates & Calculator
for
Tall Fescue
Spot Treatment
per
Label Rate:
0.03 fluid ounces per gallon
Cost Effectiveness:
Makes 266.667 gallons
at a cost of
$0.58 per gallon
at a cost of
$0.58 per gallon
Instructions:
For spot treating weeds, other than moss, with hand-held or backpack sprayers mix 0.030 fluid ounces (0.9 milliliters) of this product in one to two gallons of water to treat 1000 square feet.
Blanket Treatment
per
Label Rate:
0.02 - 0.05 fluid ounces per 1,000 sqft
Cost Effectiveness:
Covers 166667 - 347826 square feet
at a cost of
$0.44 - $0.93 per 1,000 sqft
at a cost of
$0.44 - $0.93 per 1,000 sqft
Instructions:
Tall fescue may exhibit a slight yellowing discoloration occurring within 3 to 5 days after application under some conditions. Recovery typically occurs within 4 to 7 days. If such injury or any injury cannot be tolerated, apply to a small test area before treating large areas to assure tolerance of the host turf species.
1
1
Jump to
CertainLabel™ Quicksilver Label Rates & Calculator
for
these 35 weeds
Spot Treatment
per
Label Rate:
0.03 fluid ounces per gallon
Cost Effectiveness:
Makes 266.667 gallons
at a cost of
$0.58 per gallon
at a cost of
$0.58 per gallon
Instructions:
For spot treating weeds, other than moss, with hand-held or backpack sprayers mix 0.030 fluid ounces (0.9 milliliters) of this product in one to two gallons of water to treat 1000 square feet.
Blanket Treatment
per
Label Rate:
0.02 - 0.05 fluid ounces per 1,000 sqft
Cost Effectiveness:
Covers 166667 - 347826 square feet
at a cost of
$0.44 - $0.93 per 1,000 sqft
at a cost of
$0.44 - $0.93 per 1,000 sqft