Jump to Top

Primes Source Quinclorac 75 DF Herbicide

Selective post-emergent herbicide for broadleaf and grassy weed control

Primes Source Quinclorac 75 DF Logo
Quinclorac 75 DF Select™ is a selective, post-emergent herbicide that can be safely applied to many types of turf to control a variety of broadleaf and grassy weeds. Quinclorac 75 DF Select can be applied to both residential and non-residential turf. Quinclorac 75 DF Select can be applied from 7 days before seeding and up to 28 days after emergence on selected weeds. The use of a methylated seed oil, such as Duo Stick Select is recommended to greatly enhance the effectiveness of the product.
    Active Ingredient %
    Quinclorac 75.00 %
    Other Ingredients 25.00 %
    Mode of Action
    Lipid Synthesis Inhibitors
    Site of Action
    (1) ACCase Inhibitor
    Available on Amazon

    $49.94 / lb
    Buy now

    Available on Do My Own

    $50.33 / lb
    Buy now

    Not Safe On
    No not safe on treatments listed. Please, review the label or contact the merchant for more information.
    Maximum Yearly Limits
     DO NOT apply more than 2 pounds of Quinclorac Select 75 DF Herbicide per acre (or 0.73 oz per 1000 sq ft) in one year (1.5 lbs ai per acre per year).
    Mowing Instructions
    Mowing Information. DO NOT mow 2 days before or after applying Quinclorac Select 75 DF Herbicide to maximize weed control and minimize potential turf injury. Clippings from the first three mowings should be left on the treated area.
    Water Instructions
     If soil moisture is not sufficient prior to Quinclorac Select 75 DF Herbicide application, irrigation may improve weed control. For best results, DO NOT water or irrigate for 24 hours after application. If rainfall does not occur in 2 to 7 days after application, irrigation of at least 1/2 inch is required.
    Before Seeding Instructions
    The use of Quinclorac Select 75 DF Herbicide before or after seeding or overseeding a turf area will not significantly interfere with the turfgrass seed germination and growth of those grass types identified as tolerant or moderately tolerant in Table 1 on the label. Consult Table 4 on the label for timing of applications concerning any seeding, overseeding or sprigging situation.
    CertainLabel™

    Primes Source Quinclorac 75 DF Optimized Application Label Rate Calculator

    Legend:
    Control
    Suppression
    No Control
    Spot Treatment:
    Blanket Treatment:
    per
    1
    Grass / Turf Types Safe
    Annual Bluegrass
    Annual Ryegrass
    Bahiagrass
    Buffalograss
    Centipedegrass
    Chewings Fescue
    Colonial Bentgrass
    Dichondra
    Hard Fescue
    Kentucky Bluegrass
    Perennial Ryegrass
    Red Fescue
    Roughstalk Bluegrass
    Seashore Paspalum
    Seaside Bentgrass
    St. Augustinegrass
    Tall Fescue
    Zoysiagrass
    1
    Jump to CertainLabel™ Primes Source Quinclorac 75 DF Label Rates & Calculator for these 18 turf types
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    2
    Spot Treatment
    Label Rate:
    0.123 - 0.245 ounces per gallon
    Cost Effectiveness:
    Makes 65.306 - 130.081 gallons
    at a cost of
    $0.38 - $0.76 per gallon
    Instructions:
    See label page 10 for more information.
    Blanket Treatment
    per
    Label Rate:
    0.123 - 0.245 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 65306 - 130081 square feet
    at a cost of
    $0.38 - $0.76 per 1,000 sqft
    Instructions:
    See label page 10 for more information.
    3
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    Instructions:
    Yellowing that occurs on these species can be reduced by the addition of chelated iron or sprayable soluble nitrogen fertilizer (see Application Information and Addition of Adjuvants sections).
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    4
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    Instructions:
    Apply Quinclorac Select 75 DF Herbicide to fine fescue only when it is part of a blend.
    2
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    Instructions:
    Under certain conditions, application of Quinclorac Select 75 DF Herbicide made to annual grasses at 2 to 4 tiller may not provide complete control. A sequential application will be required for grass control in these situations. Optimum control is achieved when applications of Quinclorac Select 75 DF Herbicide + methylated seed oil are applied either before second tiller or as weed grasses mature.
    3
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    Instructions:
    Under certain conditions, application of Quinclorac Select 75 DF Herbicide made to annual grasses at 2 to 4 tiller may not provide complete control. A sequential application will be required for grass control in these situations. Optimum control is achieved when applications of Quinclorac Select 75 DF Herbicide + methylated seed oil are applied either before second tiller or as weed grasses mature. Biotypes of large and smooth crabgrass in California have shown varied response to Quinclorac Select 75 DF Herbicide. If control failure occurs following a full or split application, DO NOT reapply Quinclorac Select 75 DF Herbicide. Change to a herbicide with a different mode of action.
    4
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    Instructions:
    Tank mix partner or sequential application required. NOT FOR USE to control this weed in California.
    5
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    Instructions:
    Tank mix partner or sequential application required.
    6
    Spot Treatment
    Label Rate:
    0.367 ounces per gallon
    Cost Effectiveness:
    Makes 43.597 gallons
    at a cost of
    $1.15 per gallon
    Blanket Treatment
    per
    Label Rate:
    0.367 ounces per 1,000 sqft
    Cost Effectiveness:
    Covers 43597 square feet
    at a cost of
    $1.15 per 1,000 sqft
    Instructions:
    Make 3 sequential applications of 0.245 oz (0.50 lb ai/A) of Quinclorac Select 75 DF Herbicide per 1000 sq ft at 14- to 21-day intervals.
    Questions & Comments
    Log in or sign up to leave comment   Log In  Sign Up