Fleas Insecticide

0.404 ounces per 1,000 sqft

Covers 829 square feet
at a cost of
$12.03 per 1,000 sqft

2.67 lbs per 1,000 sqft

Covers 5000 square feet
at a cost of
$5.20 per 1,000 sqft

0.25 - 0.5 fluid ounces per 1,000 sqft

Covers 192000 - 384000 square feet
at a cost of
$0.11 - $0.22 per 1,000 sqft

0.5 - 1 fluid ounces per 1,000 sqft

Covers 96000 - 192000 square feet
at a cost of
$0.22 - $0.44 per 1,000 sqft

0.27 fluid ounces per 1,000 sqft

Covers 4000 square feet
at a cost of
$4.90 per 1,000 sqft

3.33 lbs per 1,000 sqft

Covers 4000 square feet
at a cost of
$11.45 per 1,000 sqft

0.4 - 0.6 fluid ounces per 1,000 sqft

Covers 26667 - 40000 square feet
at a cost of
$0.95 - $1.42 per 1,000 sqft

0.33 - 0.65 fluid ounces per 1,000 sqft

Covers 24615 - 48485 square feet
at a cost of
$0.63 - $1.24 per 1,000 sqft

For residential lawns, apply Demon Max at the rate of 0.33-0.65 fl oz per 1,000 sq ft in a volume of water sufficient for uniform coverage such as 3-20 gal. Use the lower rate to knock down pests and the higher rate where faster knockdown or greater residual is desired. The maximum application rate on lawns and other turfgrass is 0.44 lb ai/A (0.0101 lb ai/1,000 sq ft). Lawn should not be longer than 3 inches at the time of application. Base need for retreatment upon monitoring for pest presence. Application in combination with compatible surfactants may enhance penetration. Arid climates generally require the higher volume.
For example refer to Lawn Application Dilution Table in the Label.

2.3 - 4.6 lbs per 1,000 sqft

Covers 5435 - 10870 square feet
at a cost of
$3.04 - $6.07 per 1,000 sqft

Immature fleas mature in shaded areas accessible to pets and other animals. To activate (release from the granule) the insecticide, water the treated areas with up to 0.5 inches of water directly following application.

0.11 - 0.24 fluid ounces per 1,000 sqft

Covers 33798 - 69585 square feet
at a cost of
$0.53 - $1.09 per 1,000 sqft

0.4 - 0.8 fluid ounces per 1,000 sqft

Covers 40000 - 80000 square feet
at a cost of
$0.45 - $0.90 per 1,000 sqft

Use the higher rate for fast knockdown and increased residual control. Dense or excessive (greater than 3 inches) lawn height and arid conditions may require higher volume application rates. Repeat application if necessary. Application in combination with compatible surfactants or wetting agents may enhance penetration.

0.25 - 0.5 fluid ounces per 1,000 sqft

Covers 32000 - 64000 square feet
at a cost of
$0.47 - $0.94 per 1,000 sqft

0.5 - 1 fluid ounces per 1,000 sqft

Covers 16000 - 32000 square feet
at a cost of
$0.94 - $1.87 per 1,000 sqft

Flea larvae develop in the soil of shaded areas that are accessible to pets or other animals. Use a higher volume application when treating these areas to ensure penetration of the insecticide into the soil. Note: if the lawn area is being treated with Talstar ® P Professional Insecticide at 0.25 fluid oz. per 1000 square feet for adult flea control, then the larval application rate may be achieved by increasing the application volume two- to four-fold.

2.3 - 4.6 lbs per 1,000 sqft

Covers 5435 - 10870 square feet
at a cost of
$3.59 - $7.18 per 1,000 sqft

Flea larvae develop in the soil of shaded areas that are accessible to pets or other animals. Irrigate the treated area with up to 0.5 inches of water immediately after application to activate (release from the granule) the insecticide.

2.3 - 4.6 lbs per 1,000 sqft

Covers 5435 - 10870 square feet
at a cost of
$4.09 - $8.19 per 1,000 sqft

Control is provided for up to seven days. Flea larvae develop in the soil of shaded areas that are accessible to pets or other animals. Irrigate the treated area with up to 0.5 inches of water immediately after application to activate (release from the granule) the insecticide.